I would like to be able to set the number of decimal places on identify and on dimensioning angle independently to that of the lineal dimensions. I would like to show lineal dimensioning with no decimal places and angle with one or two decimal places without having to go into setting every time.
I use mm for lineal dimensions and degrees to indicate angles. Points of a degree are very important when it comes to roof lengths. I have to change the sig digits under settings / scale type every time I dimension a angle.
I use this generally for roof tiles which manufactures spec min angles for.
Please can we have independent decimal place setting for angles.
I use mm for lineal dimensions and degrees to indicate angles. Points of a degree are very important when it comes to roof lengths. I have to change the sig digits under settings / scale type every time I dimension a angle.
I use this generally for roof tiles which manufactures spec min angles for.
Please can we have independent decimal place setting for angles.
Many thanks
Bruce
Dell XPS 8300. Windows 10
Intel(R) Core(TM) i7-2600 CPU @ 3.4GHz. 16 GB RAM. AMD Radeon R9 200 series, 32'' inside leg
Bruce
Dell XPS 8300. Windows 10
Intel(R) Core(TM) i7-2600 CPU @ 3.4GHz. 16 GB RAM. AMD Radeon R9 200 series, 32'' inside leg