What if the display status of fills, hatching, line types, line weights, etc. could be saved as part of the GoToView?
For example, we are using solid fills in our drawings. We turn the fill display off when editing the file and turn it back on only for plotting. We could then set a working view and a plotting view for each sheet.
It's always a bummer when we batch plot 15 or 20 sheets and realize that we forgot to turn the fill display on.
The alternative would be to have the display status be independent of plotting - perhaps with an ini setting?
For example, we are using solid fills in our drawings. We turn the fill display off when editing the file and turn it back on only for plotting. We could then set a working view and a plotting view for each sheet.
It's always a bummer when we batch plot 15 or 20 sheets and realize that we forgot to turn the fill display on.
The alternative would be to have the display status be independent of plotting - perhaps with an ini setting?
James Goodman, AIA
Capistrano Beach, CA
Since V2.5f (1985)
Capistrano Beach, CA
Since V2.5f (1985)