Yes, it would be a big step forward to see further development of the smart parametrics. DataCAD's "unique" way of allowing a hybrid BIM approach has so much potential compared to the more rigid pure BIM software. ... my fingers are crossed
DataCAD user since v4!
Regards
Mark Bell
Principal
ATELIER MARK BELL
Australia
https://www.ateliermarkbell.com
Regards
Mark Bell
Principal
ATELIER MARK BELL
Australia
https://www.ateliermarkbell.com
Wishlist - add the ability to move the detail name (F1, F2, F3 etc.) in Multilayout so the order of the detail names can be modified.
DataCAD user since v4!
Regards
Mark Bell
Principal
ATELIER MARK BELL
Australia
https://www.ateliermarkbell.com
Regards
Mark Bell
Principal
ATELIER MARK BELL
Australia
https://www.ateliermarkbell.com
Wish when editing a symbol and then doing a save-as, that the directory that opens up would be the same directory that the current symbol is located.
Roger Donaldson AIA CSI CDT NCARB
abUsing Datacad since 1986, ver 23.00.01.02 (SE)
http://www.RogerDonaldsonArchitect.com
abUsing Datacad since 1986, ver 23.00.01.02 (SE)
http://www.RogerDonaldsonArchitect.com
To improve speed and negate the need to turn a clipcube off then check the z-b/z-h settings add the ability to simply move the crosshair over any clipcube boundary and have a text flyout show the current z-base/z-height settings for the clipcube.
DataCAD user since v4!
Regards
Mark Bell
Principal
ATELIER MARK BELL
Australia
https://www.ateliermarkbell.com
Regards
Mark Bell
Principal
ATELIER MARK BELL
Australia
https://www.ateliermarkbell.com
Add the ability to allow any entity to "ignores clipcubes" via the ctrl-right mouse click option.
DataCAD user since v4!
Regards
Mark Bell
Principal
ATELIER MARK BELL
Australia
https://www.ateliermarkbell.com
Regards
Mark Bell
Principal
ATELIER MARK BELL
Australia
https://www.ateliermarkbell.com
Wish in the Smart Entitiy Managers, there is a 2d representation of the item that shows the changes as you make them, i.e. below the wall settings have an image showing a short lines with end & cavity settting that change as one makes changes.
Roger Donaldson AIA CSI CDT NCARB
abUsing Datacad since 1986, ver 23.00.01.02 (SE)
http://www.RogerDonaldsonArchitect.com
abUsing Datacad since 1986, ver 23.00.01.02 (SE)
http://www.RogerDonaldsonArchitect.com
Wish in the Plot Sheet menu that one can move sheets up and down the list so they end up in the correct order, and that one could batch plot multiple sheets into one .pdf file in the correct order.
Roger Donaldson AIA CSI CDT NCARB
abUsing Datacad since 1986, ver 23.00.01.02 (SE)
http://www.RogerDonaldsonArchitect.com
abUsing Datacad since 1986, ver 23.00.01.02 (SE)
http://www.RogerDonaldsonArchitect.com
Hello Roger,
DataCAD already allows you to move individual sheets up or down in the plot sheet list. What is really needed is a Plot Sheet Manager that works in a similar way to the Layer Manager and allows one or more sheets to be selected and moved up/down to quickly organize the sheet ordering. The current system works....but it's cumbersome especially when the drawing file has 100-150+ sheets and more are needed closer to the front of the list
DataCAD already allows you to move individual sheets up or down in the plot sheet list. What is really needed is a Plot Sheet Manager that works in a similar way to the Layer Manager and allows one or more sheets to be selected and moved up/down to quickly organize the sheet ordering. The current system works....but it's cumbersome especially when the drawing file has 100-150+ sheets and more are needed closer to the front of the list
DataCAD user since v4!
Regards
Mark Bell
Principal
ATELIER MARK BELL
Australia
https://www.ateliermarkbell.com
Regards
Mark Bell
Principal
ATELIER MARK BELL
Australia
https://www.ateliermarkbell.com
Roger Donaldson AIA CSI CDT NCARB
abUsing Datacad since 1986, ver 23.00.01.02 (SE)
http://www.RogerDonaldsonArchitect.com
abUsing Datacad since 1986, ver 23.00.01.02 (SE)
http://www.RogerDonaldsonArchitect.com
Hi Roger,
Yes, it does the 'bare minimum' and could be enhanced to improve it. If you need to insert a sheet between sheets .... ....you need to move everything in front of it further down the list....if you have a lot of sheets in front, then you have a lot to move before you can insert the additional sheet(s). This makes it time consuming and hence the ask for a Plot Sheet Manager type of interface similar to the LM.
Yes, it does the 'bare minimum' and could be enhanced to improve it. If you need to insert a sheet between sheets .... ....you need to move everything in front of it further down the list....if you have a lot of sheets in front, then you have a lot to move before you can insert the additional sheet(s). This makes it time consuming and hence the ask for a Plot Sheet Manager type of interface similar to the LM.
DataCAD user since v4!
Regards
Mark Bell
Principal
ATELIER MARK BELL
Australia
https://www.ateliermarkbell.com
Regards
Mark Bell
Principal
ATELIER MARK BELL
Australia
https://www.ateliermarkbell.com
Add more than 36 points to a fenceline selection so it can include more snap points before closing.
DataCAD user since v4!
Regards
Mark Bell
Principal
ATELIER MARK BELL
Australia
https://www.ateliermarkbell.com
Regards
Mark Bell
Principal
ATELIER MARK BELL
Australia
https://www.ateliermarkbell.com
Some of our labels for smart walls, windows, doors are wider than the preview space available so the full extent of the label name cannot be seen.
Add the ability to stretch/increase the width of the display window where the names are shown.
Add the ability to stretch/increase the width of the display window where the names are shown.
DataCAD user since v4!
Regards
Mark Bell
Principal
ATELIER MARK BELL
Australia
https://www.ateliermarkbell.com
Regards
Mark Bell
Principal
ATELIER MARK BELL
Australia
https://www.ateliermarkbell.com
This wish is to fill a small gap: after moving something a given distance, and then going to the stretch menu, there is a Prev / 2 and a Prev * 2 option. But if you select Prev Distance, you then only have Distance / 2 as an option.
Yes, good catch Neil!
Thanks! - Josh
Do. Or do not. There is no try.
Josh's Digital Downloads is come back online soon. Stay tuned.
Do. Or do not. There is no try.
Josh's Digital Downloads is come back online soon. Stay tuned.
Who is online
Users browsing this forum: No registered users and 101 guests