I have been using Version 11 and am upgrading to version 16. Do I need to do anything to import a drawing into version 16 to make any changes to it?
Mark Toce
DATACAD LLC
Sales: 1-800-394-2231 | info@datacad.com
Support: 860-217-0567 | techsupport@datacad.com
DATACAD LLC
Sales: 1-800-394-2231 | info@datacad.com
Support: 860-217-0567 | techsupport@datacad.com
David A. Giesselman
Senior Vice President & CTO
DATACAD LLC
dave@datacad.com
Providing thoughtfully crafted, software bugs to the DataCAD community since 1984.
Senior Vice President & CTO
DATACAD LLC
dave@datacad.com
Providing thoughtfully crafted, software bugs to the DataCAD community since 1984.
OK, so I opened an existing file created in version 11. Version 16 will not allow me to cut the walls for windows and doors. The Z height is set at 9 feet. Will I need to take a course to run version 16? I worked with version 11 and loved it. Can I change version 16 to operate like 11?
DataCAD 16 creates parametric walls, doors and windows by default and will not cut the old 2 1/2D walls created in v11. However, v16 can still create walls the old way. Go into the Architect menu and toggle off Auto 3D. You should now be able to work with your old walls.
Dave
Dave
David A. Giesselman
Senior Vice President & CTO
DATACAD LLC
dave@datacad.com
Providing thoughtfully crafted, software bugs to the DataCAD community since 1984.
Senior Vice President & CTO
DATACAD LLC
dave@datacad.com
Providing thoughtfully crafted, software bugs to the DataCAD community since 1984.
Glad it's working for you Rick!
Regards,
Dave
Regards,
Dave
David A. Giesselman
Senior Vice President & CTO
DATACAD LLC
dave@datacad.com
Providing thoughtfully crafted, software bugs to the DataCAD community since 1984.
Senior Vice President & CTO
DATACAD LLC
dave@datacad.com
Providing thoughtfully crafted, software bugs to the DataCAD community since 1984.
Another question. I had a text style called arcstyle which was a chr file. Can I import this into Datacad 16?
Just copy it into DataCAD 16's Fonts folder.
Dave
Dave
David A. Giesselman
Senior Vice President & CTO
DATACAD LLC
dave@datacad.com
Providing thoughtfully crafted, software bugs to the DataCAD community since 1984.
Senior Vice President & CTO
DATACAD LLC
dave@datacad.com
Providing thoughtfully crafted, software bugs to the DataCAD community since 1984.
Copied and pasted. They are not showing up on the font list. Even after checking the box for all fonts.
Get out of DataCAD and open the file dcadwin.ini in Notepad. Look in the [General] section for the following key:
And change it to:
Restart DataCAD and see if your .CHR fonts now show up as .SHX fonts.
Dave
And change it to:
Restart DataCAD and see if your .CHR fonts now show up as .SHX fonts.
Dave
David A. Giesselman
Senior Vice President & CTO
DATACAD LLC
dave@datacad.com
Providing thoughtfully crafted, software bugs to the DataCAD community since 1984.
Senior Vice President & CTO
DATACAD LLC
dave@datacad.com
Providing thoughtfully crafted, software bugs to the DataCAD community since 1984.
Thank you, thank you, thank you!!!!!
Next question- I had purchased some hatch patterns from Cheap Thrills. How can I transfer them over to version 16?
Just place them in the Support Files\Hatch Patterns folder. If these patterns are contained in a dcadwin.pat file, they will need to be converted after you've copied them into that folder. You can do them individually in the Manage dialog of the Hatch menu. Or you can (again) open dcadwin.ini in Notepad and find the following key in the [HatchPatterns] section:
And change it to:
This will cause all existing .PAT files to be converted to the new .DHP file format.
Dave
And change it to:
This will cause all existing .PAT files to be converted to the new .DHP file format.
Dave
David A. Giesselman
Senior Vice President & CTO
DATACAD LLC
dave@datacad.com
Providing thoughtfully crafted, software bugs to the DataCAD community since 1984.
Senior Vice President & CTO
DATACAD LLC
dave@datacad.com
Providing thoughtfully crafted, software bugs to the DataCAD community since 1984.
Cheap Thrills - I like it!
Who is online
Users browsing this forum: No registered users and 73 guests