forum.datacad.com

Our firm recently switched plotters, so for thousands of drawings our plot settings no longer work.
Is there an easy way to change print settings for multiple drawings at once or are we stuck with changing each drawing's plot settings individually?

This has been a big request of mine for a long time, but unfortunately there is no easy way - you'll have to change the plotter and paper size for each individual file.

Few things you can do related to this.

Work around the missing Printer Popup:
You can rename the new printer to the old printer name, setup another copy of the printer with old printer name or just leave the old printer installed even though it's missing so you don't get the little pop dialog box that tells you the printers missing. A setting to disable this message would be nice, chances are you will already know what printers are available to you right?

Non-descript Printer Names
We ran into this same issue years back and decided going forward to just name our plotters and printer with non-descript names like 'Plotter' & 'LaserJet'. It works great, especially when different users print to different printers, so no matter which device their computer is set to print to for 'LaserJet', Datacad just knows the name and the windows printer settings handle sending the prints to the different printers. Yes it was a process for a year or so to update the current working files but once they were set everything going forward uses the non-descript names which makes it nice. We have swapped multiple printers since without a hiccup.

Use Printer Settings and/or Toolbar Buttons
Another option once you have your workarounds for the old printer info is to setup saved Print settings. We created a drop down toolbar that loads all the settings for our most common printer settings that use the non-descript names (recommended) or the new printer name so we don't have to hassle with adjusting anything in the printer dialogs. If you do not have a printer installed with the name of the old printer, these will not work as they will get stuck on the little popup telling you the printer is missing. If you do have a printer setup with the old name, then you can use these DPS files and/or drop downs to quickly load all your new settings in one single click. The only thing you have to adjust once you have things setup to this point is if a new printer's paper size list is different than the old printers. You can easily just update the DPS files once when this happens.

In the Print / Plot menu, there are two options...

S3 Save Settings
S4 Load Settings

If you configure your printer then select Save Settings, you can save them to a .DPS file.

In DCADWIN.INI the [Printer] section has a key, Settings Auto Load. If you set this to your new printer settings file, it will be loaded automatically.

Settings Auto Load=MyNewPrinter.dps

Printer Settings files are located in C:\DataCAD 17\Support Files\Plotter Settings by default.

This might get you what you want.

MFM

Mark F. Madura wrote:In DCADWIN.INI the [Printer] section has a key, Settings Auto Load. If you set this to your new printer settings file, it will be loaded automatically.

Whaaaa? Cool, I missed that little nugget.

Mark - with this setting I'm assuming that if the file uses a different paper size than what you're using in the INI file you'll still have to change the paper size, right?

Here's the contents of my Printer Settings file:The paper size is an index into the list of available paper sizes.

Years ago I created printer (plotter) settings files for each paper size, orientation, and plot scale for each plotter/printer we use. I then created icons for each one and set up a context tool bar that pops up when you enter the plotter menu. So it is just a matter of picking the correct icon from the drop down menu and then laying out the plot and plotting. It took a bit of work to set it all up but now it is a simple click or two to plot to any plotter at any size and scale.

Great, thanks so much for the replies!

Mark, your suggestion is exactly what I'm looking for. Do you know if there's a way to select a previously used scale size instead of inputting a value of 10 for example? Something like this: Last Plot Scale= Previously Selected.

And a big thanks to Josh. That's definitely something to I'd like to implement with future drawings.

I don't think so, but you could try leaving the Last Plot Scale key blank (i.e., Last Plot Scale= ) and see if DataCAD initializes it with the default value or the drawing's current value.