Here is a "version" for you to check. It is the pattern as I understand it, but adjusted to show the mortar joints as shadow lines. That will let you see each line a bit more clearly. The scale that you want to use is 1.
[Header]
Scale=200
Angle=0
Display Scale=10
Segments=8
[Segments]
001=0,0,90,0,0,0,512,72,-268
002=0,0,90,128,85,0,512,72,-268
003=0,0,90,256,170,0,512,72,-268
004=0,0,90,384,255,0,512,72,-268
005=0,0,0,0,0,0,340,484,-28
006=0,0,0,128,85,0,340,484,-28
007=0,0,0,256,170,0,340,484,-28
008=0,0,0,384,255,0,340,484,-28
I hope that this is close to what you need and that you can see how the pattern is created. Note how the minus number applies to the pin up repeat. For example, the 72 is the length of the 90 degree lines and the -268 is the pin up. That gives that line a repeat distance of 340/32". The horizontal lines are 484 long with 28 up for a repeat distance of 512/23".
Have fun.
Woody