Page 1 of 1
Measurement of Bearing of a Line
Posted:
Thu Feb 06, 2014 5:43 pmby Bryron
How do I measure the bearing information of a line and print that information near the line?
Re: Measurement of Bearing of a Line
Posted:
Thu Feb 06, 2014 6:01 pmby David A. Giesselman
Go to the AngleType menu under Settings and set it to Bearings. Then within the Measures menu, choose LineAngle and select the line. You can then add that result to the drawing.
Dave
Re: Measurement of Bearing of a Line
Posted:
Thu Feb 06, 2014 6:02 pmby Roger D
Making sure you are in the Bearings under Settings/Angle Type
F7 - Measure
S3- Line Angle
F1 - To Drawing
Command edit and/or Command Performance has a PlatTool Command, but you have to hit each end point to get both Dis & Dir.
Seems like there is a 3rd method/macro that I can not find.
Re: Measurement of Bearing of a Line
Posted:
Thu Feb 06, 2014 7:35 pmby Bryron
I have it figured out. Thanks for the quick reply.
Byron