forum.datacad.com

We are working on a building with rigid roof insulation, which we use either Net or ANSI 37 at 45 degrees (so it is vertical and horizontal).

We have EIFS, which is EPS insulation, which we are using the Hex pattern for.

We are also using fiberglass batts, and the usual insulation linetype for that.

We are using a metal panel on part of the exterior, which has mineral wool insulation, and I want to use a hatch pattern that is easily differentiated, and that reads like mineral wool.

What hatch pattern do you use for mineral wool, or what would you suggest?

Use a linetype insulation.

we use it for cellulose but try cross

Thanks for those suggestions. Mark W. suggested RndmLite or RndmHevy linetypes on the DBUG forum. I am going to go with RndmHevy for the 4" thick mineral wool, for now.

Here it is on the right side:

Lookin' good boss!

So, we ended up using the hatch pattern called Flex at a scale of 75:

Nice... Either looks nice and professional.

I'll have to find a use for Random Heavy.