Use this forum to ask questions about DataCAD 18 and DataCAD LT 18.
#72085 by David A. Giesselman
Mon Aug 14, 2017 10:28 am
GARY247 wrote:I didn't see it in cheep tricks. How do I reach Josh?

This is Josh's website.

Dave
#72101 by Neil Blanchard
Tue Aug 15, 2017 7:48 am
Here are two patterns that might work:

Code: Select all[Header]
Scale=200
Angle=0
Display Scale=10
Segments=40

[Segments]
001=0, 0, 0, 0,0, 8,8, 15.625,-.375
002=0, 0, 90, 0,0, 8,8, 7.625,-8.375
003=0, 0, 0, 0,7.625, 8,8, 15.625,-.375
004=0, 0, 90, 15.625,0, 8,8, 7.625,-8.375
005=0, 0, 90, 2,.75, 16,16, 1,-31
006=0, 0, 135, 2,1.75, 22.627417,22.627417, .3535534,-22.273864
007=0, 0, 90, 1.75,2, 16,16, 1.5,-30.5
008=0, 0, 90, 8,3, 16,16, 1.5,-30.5
009=0, 0, 135, 8,4.5, 22.627417,22.627417, .3535534,-22.273864
010=0, 0, 90, 7.75,4.75, 16,16, 1,-31
011=0, 0, 90, 14,2.5, 16,16, 1.5,-30.5
012=0, 0, 135, 14,4, 22.627417,22.627417, .7071068,-21.92031
013=0, 0, 90, 13.5,4.5, 16,16, .5,-31.5
014=0, 0, 90, 18,.75, 16,16, 1,-31
015=0, 0, 135, 18,1.75, 22.627417,22.627417, .3535534,-22.273864
016=0, 0, 90, 17.75,2, 16,16, 1.5,-30.5
017=0, 0, 90, 24,3, 16,16, 1.5,-30.5
018=0, 0, 135, 24,4.5, 22.627417,22.627417, .3535534,-22.273864
019=0, 0, 90, 23.75,4.75, 16,16, 1,-31
020=0, 0, 90, 30,2.5, 16,16, 1.5,-30.5
021=0, 0, 135, 30,4, 22.627417,22.627417, .7071068,-21.92031
022=0, 0, 90, 29.5,4.5, 16,16, .5,-31.5
023=0, 0, 90, 10,8.75, 16,16, 1,-31
024=0, 0, 135, 10,9.75, 22.627417,22.627417, .3535534,-22.273864
025=0, 0, 90, 9.75,10, 16,16, 1.5,-30.5
026=0, 0, 90, 16,11, 16,16, 1.5,-30.5
027=0, 0, 135, 16,12.5, 22.627417,22.627417, .3535534,-22.273864
028=0, 0, 90, 15.75,12.75, 16,16, 1,-31
029=0, 0, 90, 22,10.5, 16,16, 1.5,-30.5
030=0, 0, 135, 22,12, 22.627417,22.627417, .7071068,-21.92031
031=0, 0, 90, 21.5,12.5, 16,16, .5,-31.5
032=0, 0, 90, 26,8.75, 16,16, 1,-31
033=0, 0, 135, 26,9.75, 22.627417,22.627417, .3535534,-22.273864
034=0, 0, 90, 25.75,10, 16,16, 1.5,-30.5
035=0, 0, 90, 32,11, 16,16, 1.5,-30.5
036=0, 0, 135, 32,12.5, 22.627417,22.627417, .3535534,-22.273864
037=0, 0, 90, 31.75,12.75, 16,16, 1,-31
038=0, 0, 90, 38,10.5, 16,16, 1.5,-30.5
039=0, 0, 135, 38,12, 22.627417,22.627417, .7071068,-21.92031
040=0, 0, 90, 37.5,12.5, 16,16, .5,-31.5


Code: Select all[Header]
Scale=200
Angle=0
Display Scale=10
Segments=38

[Segments]
001=0, 0, 0, 0,0, 0,8
002=0, 0, 90, 0,0, 8,8, 8,-8
003=0, 0, 90, 2,.75, 16,16, 1,-31
004=0, 0, 135, 2,1.75, 22.627417,22.627417, .3535534,-22.273864
005=0, 0, 90, 1.75,2, 16,16, 1.5,-30.5
006=0, 0, 90, 8,3, 16,16, 1.5,-30.5
007=0, 0, 135, 8,4.5, 22.627417,22.627417, .3535534,-22.273864
008=0, 0, 90, 7.75,4.75, 16,16, 1,-31
009=0, 0, 90, 14,2.5, 16,16, 1.5,-30.5
010=0, 0, 135, 14,4, 22.627417,22.627417, .7071068,-21.92031
011=0, 0, 90, 13.5,4.5, 16,16, .5,-31.5
012=0, 0, 90, 18,.75, 16,16, 1,-31
013=0, 0, 135, 18,1.75, 22.627417,22.627417, .3535534,-22.273864
014=0, 0, 90, 17.75,2, 16,16, 1.5,-30.5
015=0, 0, 90, 24,3, 16,16, 1.5,-30.5
016=0, 0, 135, 24,4.5, 22.627417,22.627417, .3535534,-22.273864
017=0, 0, 90, 23.75,4.75, 16,16, 1,-31
018=0, 0, 90, 30,2.5, 16,16, 1.5,-30.5
019=0, 0, 135, 30,4, 22.627417,22.627417, .7071068,-21.92031
020=0, 0, 90, 29.5,4.5, 16,16, .5,-31.5
021=0, 0, 90, 10,8.75, 16,16, 1,-31
022=0, 0, 135, 10,9.75, 22.627417,22.627417, .3535534,-22.273864
023=0, 0, 90, 9.75,10, 16,16, 1.5,-30.5
024=0, 0, 90, 16,11, 16,16, 1.5,-30.5
025=0, 0, 135, 16,12.5, 22.627417,22.627417, .3535534,-22.273864
026=0, 0, 90, 15.75,12.75, 16,16, 1,-31
027=0, 0, 90, 22,10.5, 16,16, 1.5,-30.5
028=0, 0, 135, 22,12, 22.627417,22.627417, .7071068,-21.92031
029=0, 0, 90, 21.5,12.5, 16,16, .5,-31.5
030=0, 0, 90, 26,8.75, 16,16, 1,-31
031=0, 0, 135, 26,9.75, 22.627417,22.627417, .3535534,-22.273864
032=0, 0, 90, 25.75,10, 16,16, 1.5,-30.5
033=0, 0, 90, 32,11, 16,16, 1.5,-30.5
034=0, 0, 135, 32,12.5, 22.627417,22.627417, .3535534,-22.273864
035=0, 0, 90, 31.75,12.75, 16,16, 1,-31
036=0, 0, 90, 38,10.5, 16,16, 1.5,-30.5
037=0, 0, 135, 38,12, 22.627417,22.627417, .7071068,-21.92031
038=0, 0, 90, 37.5,12.5, 16,16, .5,-31.5


Save these as .DHP files - the first one has 2 lines at all the mortar joints, and the second is just 1 line joints.

Who is online

Users browsing this forum: No registered users and 4 guests

About DataCAD Forum

The DataCAD Forum is a FREE online community we provide to enhance your experience with DataCAD.

We hope you'll visit often to get answers, share ideas, and interact with other DataCAD users around the world.

DataCAD

Software for AEC Professionals Since 1984