Page 1 of 1
Undo command drops out
Posted:
Mon Dec 19, 2016 1:46 pmby Tim Mohr
We are having an issue with the undo command in DCAD 19 - it keeps dropping/greying out and the only way to re-initiate it appears to be a close and re-open - this is getting pretty aggravating.
Re: Undo command drops out
Posted:
Mon Dec 19, 2016 2:20 pmby Dave
Tim Mohr wrote:We are having an issue with the undo command in DCAD 19 - it keeps dropping/greying out and the only way to re-initiate it appears to be a close and re-open - this is getting pretty aggravating.
refer to
http://forum.datacad.com/viewtopic.php?f=69&t=15711&hilit=undoDaveR
Re: Undo command drops out
Posted:
Mon Dec 19, 2016 3:04 pmby Tim Mohr
Ok ...if I read this correctly we are waiting for an update that will address this yes?
Re: Undo command drops out
Posted:
Mon Dec 19, 2016 5:55 pmby David A. Giesselman
In short, yes. In the mean time if you notice the Undo/Redo icons disabled, go to the Hatch menu and exit. The Undo system will be re-enabled.
Dave
Re: Undo command drops out
Posted:
Sun Jan 15, 2017 3:35 pmby DBrennfoerder
Hmm, Strange.
I've been on v19 since near the end of the year and didn't notice any "undo" problem. But last week I migrated to a new laptop and the "undo" problem arose. I switched from an HP with Centrino2 processor, now on Dell Inspiron with Core i7 processor.
Waiting for an update to fix this problem.
In the meantime, the Hatch/Exit trick seems to remedy the problem.
Shortly after I posted this, I got an email from Mark advising me to upgrade to latest version. That fixed the problem. Happy camper! Great service again from the pro's.
Re: Undo command drops out
Posted:
Sun Jan 15, 2017 5:37 pmby Mark F. Madura
Go to Help, Check for Update in DataCAD 19. The fix is in 19.00.01.
Re: Undo command drops out
Posted:
Sun Jan 15, 2017 7:16 pmby Tim Mohr
thanks - just uploaded 19.00.01.03 so presumably that's the end of that
Re: Undo command drops out
Posted:
Fri Feb 03, 2017 2:40 pmby Tim Mohr
latest update resolves this ...thanks