Imac Retina screen
Posted:
Tue Apr 17, 2018 2:46 amby Glenn Curran
I've been using a pre Retina Imac for 4 years or so with DataCad and now I'm considering replacing the machine with a 2017 5k model. However, I'm a little concerned that the text and icons in the DataCad menus will be too small to read with my poor old eyes. There is probably a way to increase the "visibility" of these bits and pieces and still retain sharpness, but I'm pretty hopeless at all this technical stuff. Has anyone been through this? Any advice is much appreciated. Thanks.
Re: Imac Retina screen
Posted:
Tue Apr 17, 2018 7:33 amby Neil Blanchard
What version of Windows are you running? There is a thread here on the Forum about running DataCAD of very high resolution screens.
https://www.datacad.com/bbs/viewtopic.php?f=6&t=14525&p=64770
Re: Imac Retina screen
Posted:
Tue Apr 17, 2018 8:07 amby Glenn Curran
Thanks for the response, Neil. At the moment I'm on W7 with Dcad 12, but if I get the new machine I will be on W10 with Dcad 20 LT, as I understand that Dcad 12 won't run with W10. Ill take a look at that thread, thank you.
Regards
Glenn