Page 1 of 1
repair drawing
Posted:
Sun Jan 21, 2024 1:35 pm
by Bob Urbanek
Having a big problem with a drawing. Tried to repair it. In the first window, I chose defaults, and hit OK. Took me to the window that asks for z settings.Also chose defaults. Can't go anywhere from there. What am I missing?
Thanks, Bob
Re: repair drawing
Posted:
Sun Jan 21, 2024 2:24 pm
by rwstarrett
Not much help, but I had the same issue a while back. Not matter the settings I chose; it would just sit a do nothing. I kept trying and finally it just worked. Repairs seem to be a hit and miss if it actually works.
Re: repair drawing
Posted:
Sun Jan 21, 2024 5:35 pm
by Roger D
Recently I had problems with a file. So I just opened a new empty file and imported everything from the old file. Then it worked fine.
Re: repair drawing
Posted:
Mon Jan 22, 2024 12:52 pm
by Bob Urbanek
Thanks Roger, that worked. A few settings changed, but not a problem.
Bob
Re: repair drawing
Posted:
Mon Jan 22, 2024 2:36 pm
by Roger D
The one settings that did not get passed through for me was the MSP Sheet Names did not get updated.