Crashed again. Seems to be a regular occurrence,now.Usually not a big problem---just re-open the drawing.It retrieves the drawing to the last save. This time, I got the message (internal diagnostics fault 10 error from 74) .When I try to re-open the file, the error message is still there. Tried a cold boot on my computer, but get the same result. So many different problems happening fairly frequently. Getting pretty frustrated. Would re-installing the program be an option for me? Thanks, Bob
Have you tried performing a repair on the file or creating a new blank file and import your file into that to see if you can purge out what might be inside your file that is crashing it?
Thanks, Josh Huggins | Wisdom House Inc. CEO | President | Residential Designer Do. Or do not. There is no try.
I would try to do file/export to a new .aec file. When not in the program, I would also go to the Temporary and Recovery folders and make sure they are empty of all files. Move any files to another new TempBackup folder just in case you do need one of them.
Roger Donaldson AIA CSI CDT NCARB abUsing Datacad since 1986, ver 23.00.02.15 (SE) http://www.RogerDonaldsonArchitect.com
Thanks Josh and Roger. I had tried to do a repair, but it wouldn't work. Out of frustration, I renamed the file----then I was able to do a repair, which worked. Been busy with family stuff all weekend, so I'm going to make sure all is OK, then save it under a new name. Thanks again. Bob
