For those that use DataCAD's 3D abilities there's often the need to quickly know what the overall height distance is between the active Z-Base and Z-Height without having to do the maths, but instead simply by glancing at the readout bar. This is more so if the Z-Datum Reference is used.
Wishlist: Add an additional readout value, zD (Z-Distance) to accompany zB and zH values and be the distance between the two: zD = zH - zB. By re-spacing the existing 6 readout values a seventh should fit to give the zD.
This would be particularly useful with multi-storey projects where the zD would be a quick reference to each floor-floor height/vertical zone.
Wishlist: Add an additional readout value, zD (Z-Distance) to accompany zB and zH values and be the distance between the two: zD = zH - zB. By re-spacing the existing 6 readout values a seventh should fit to give the zD.
This would be particularly useful with multi-storey projects where the zD would be a quick reference to each floor-floor height/vertical zone.
joshhuggins likes this
DataCAD user since v4!
Regards
Mark Bell
Principal
ATELIER MARK BELL
Australia
https://www.ateliermarkbell.com
Regards
Mark Bell
Principal
ATELIER MARK BELL
Australia
https://www.ateliermarkbell.com