Help Please...
Have been using DataCad since 1988...was one of the first in Australia.
Have recently dusted off the old version 7 (dos) and applied to some current work...may upgrade to current windows version if I can get the following macro from someone.
Have an architectural background, but need to adapt datacad to draw drill-traces from a current exploration project. Each line needs to be made up of 1m segments, up to say 300m long, with each segment assigned a colour relative to a coinciding mineral grade.
Basically, each line is a pictorial reference of the drill core that will typically drill down from surface at an angle of say 45% or so from horizontal. Generally, such drill lines deviate up and down in the z direction as well swing from side to side in the plan view...we need the capacity to represent this from the table data.
I have a very specific need for a DCAL macro that can take such information from raw spreadsheet (Excel)...obviously to a set format...and extract them into lines (in 3d) in datacad.
I wonder if someone is interested (or capable) of writing such a macro for me?
The Excel sheet may look like the following...
RL = 223
Incl
0-50 = 55
50-100 = 57
100-250 = 61
Azm
0-50 = 210
50-100 = 205
100-250 = 209
71 059-061 0.29
71 060-061 0.71
71 061-062 0.73
71 062-063 0.22
71 063-064 0.22
71 064-065 1.62
71 065-066 1.01
71 066-067 1.15
71 067-068 1.92
Where...
RL = 223 = starting z height of hole
Incl
0-50 = 55 = inclination (55 degrees from horizontal) of the line from 0m - 50m
50-100 = 57 = inclination (57 degrees from horizontal) of the line from 50m - 100m
100-250 = 61 = inclination (61 degrees from horizontal) of the line from 100m - 250m
Azm
0-50 = 210 = azmith (variation in degrees from true north in plan view) of the line from 0m - 50m
50-100 = 205 = azmith (variation in degrees from true north in plan view)of the line from 50m - 100m
100-250 = 209 = azmith (variation in degrees from true north in plan view) of the line from 100m - 250m
71 = name of line (tag)
059-061 = 1m segment of the line (each segment needs to drawn individually)
0.29 = line colour reference for each segment (ie 0.0 - 0.02 = yellow, 0.021 - 0.50 = brown, and so on)
The idea is to automate the drawing of lines from raw Excel data, via a Dcal macro....and very happy to pay...if reasonable costs...lol
I can be contacted at info (at) axiomstudio.com.au
Regards and thanks in advance,
David
Have been using DataCad since 1988...was one of the first in Australia.
Have recently dusted off the old version 7 (dos) and applied to some current work...may upgrade to current windows version if I can get the following macro from someone.
Have an architectural background, but need to adapt datacad to draw drill-traces from a current exploration project. Each line needs to be made up of 1m segments, up to say 300m long, with each segment assigned a colour relative to a coinciding mineral grade.
Basically, each line is a pictorial reference of the drill core that will typically drill down from surface at an angle of say 45% or so from horizontal. Generally, such drill lines deviate up and down in the z direction as well swing from side to side in the plan view...we need the capacity to represent this from the table data.
I have a very specific need for a DCAL macro that can take such information from raw spreadsheet (Excel)...obviously to a set format...and extract them into lines (in 3d) in datacad.
I wonder if someone is interested (or capable) of writing such a macro for me?
The Excel sheet may look like the following...
RL = 223
Incl
0-50 = 55
50-100 = 57
100-250 = 61
Azm
0-50 = 210
50-100 = 205
100-250 = 209
71 059-061 0.29
71 060-061 0.71
71 061-062 0.73
71 062-063 0.22
71 063-064 0.22
71 064-065 1.62
71 065-066 1.01
71 066-067 1.15
71 067-068 1.92
Where...
RL = 223 = starting z height of hole
Incl
0-50 = 55 = inclination (55 degrees from horizontal) of the line from 0m - 50m
50-100 = 57 = inclination (57 degrees from horizontal) of the line from 50m - 100m
100-250 = 61 = inclination (61 degrees from horizontal) of the line from 100m - 250m
Azm
0-50 = 210 = azmith (variation in degrees from true north in plan view) of the line from 0m - 50m
50-100 = 205 = azmith (variation in degrees from true north in plan view)of the line from 50m - 100m
100-250 = 209 = azmith (variation in degrees from true north in plan view) of the line from 100m - 250m
71 = name of line (tag)
059-061 = 1m segment of the line (each segment needs to drawn individually)
0.29 = line colour reference for each segment (ie 0.0 - 0.02 = yellow, 0.021 - 0.50 = brown, and so on)
The idea is to automate the drawing of lines from raw Excel data, via a Dcal macro....and very happy to pay...if reasonable costs...lol
I can be contacted at info (at) axiomstudio.com.au
Regards and thanks in advance,
David